The idea is to install the tile system on the outside of the restaurant and keep the exterior in pristine condition for a few years.
Then, when the restaurant is fully up-to-date, the tiles can be removed and used again.
You might not need to do much to start, but when you have a restaurant that needs to be updated every month, it can be a time-consuming and expensive endeavor.
In the case of this one, I used a simple method to install tiles into a patio that I built from scratch.
The goal was to remove the tile on the patio to the outside and have it stand out against the background.
Once that was done, I just took the old tiles out of the patio and placed them into the kitchen.
The patio tiles are about a foot thick, which makes it easier to remove them, and they were easy to assemble.
After that, I removed the patio tiles and placed a couple more tiles in the kitchen, which I then attached to a piece of metal to keep them secure.
To make the ceramic tile patio, you’ll need some ceramic tile.
This is the one that I used, which is about 5 feet by 2 feet.
I chose the dark green because it was my favorite color.
I did a few coats, but I ended up spraying a little on the tiles to help them adhere.
After spraying, I added a coat of a coat with a coat or two of primer and let it dry.
Once dry, I attached a layer of paint to the top of the tile to help protect it.
I also placed a layer on top of it to protect the surrounding ceramic tiles.
Next, I painted the tile with the ceramic tiles primer and used a spray gun to paint the ceramic back to the background of the kitchen and patio.
Now that the tile is painted, it’s time to put the ceramic into the patio.
To do this, I filled the interior of the interior patio with ceramic tile to about 8 inches deep.
I covered the perimeter of the ceramic with a layer or two more ceramic tiles to keep it covered.
I attached a few more ceramic tile tiles to the perimeter to keep the patio looking even more modern, and I added more ceramic paint to give the tile a more “art deco” feel.
Here’s a close-up of the finished patio, which looks like a cool outdoor bar.
After the ceramic is painted and covered, I then removed the ceramic from the patio, covered it with another layer of ceramic tiles, and put it into the basement of the house.
This is what the basement looked like once all the tiles had been removed.
In the basement, I had two different methods of installing tile.
The first was to simply take the old patio tiles out and paint the inside of the front door, which worked well, but it wasn’t very sturdy.
I opted for the second method and placed the ceramic in the door and attached it to a metal pole to attach it to the house to keep from sliding.
Finally, I covered all of the tiles with a second layer of tile, which helped hold them in place.
Overall, this was a fun project to build, and it is an easy way to add some new touches to your kitchen or outdoor patio without spending too much money.
You can read more about the project here.